Caold Technology Pty Ltd

5x130, CB 67 to 5x130 Threading Insert Spacer Adapters

  • Sale
  • Regular price $159.00


Caold Technology wheel spacer adapters:

This style of spacer is intended for use with cars that use lug bolts. Please see the diagram for a guide to installation. You will most likely also require low-spacer bolts for use with these spacers (sold separately)

Per 1 qty order is 1 pair, 2 pcs.

Car PCD - 5x130
Wheel PCD - 5x130

Car CB - 67 mm
If your car centre bore is a different size please contact us first.
Wheel CB - 67 /  71.5 / 71.6 / 84.1 / 89.1mm or custom size
If 'Custom size' is your option, please provide the size in the 'Special Instruction for Seller' section.

Threading Insert Thread Size - M12x1.25 / M12x1.5 / M14x1.5 / M14x1.25
*Please let us know in the section 'Special Instruction for Seller' when you checkout.*

Outer Diameter- 164 mm

Hub centric lip height - 8 mm

If you have special request or different specs you'd like to pursue, please contact us via email, sales@caold.com.au or call our number +61395601660 (weekdays 9.30am to 5pm AEST) or text our phone number 0423 499 258.

Disclaimer: if you car uses lug bolts, this is very important!!!

If you plan to use OEM or standard factory bolts to mount the spacer to the hub, please be aware that the bolt heads may protrude beyond the spacer’s mounting surface. This can prevent proper seating of the wheel unless your rims have adequate recess pockets to accommodate the bolt heads

You may need to additionally purchase low-profile spacer bolts to use instead

If you’re unsure whether your rims have sufficient clearance, we suggest consulting a professional fitter or licensed mechanic to confirm compatibility

HUB PROTRUSION DISCLAIMER
You need to consider the size of your hub protrusion when purchasing spacers with a hub centric lip. We are unable to verify any vehicle's hub protrusion even if you provide the make, model, and year; a wheel must be temporarily removed and the height measured

Depending on the relative sizes of your wheel centre bore and car centre bore, there may need to be a step machined on the inside bore to support the hub centric lip. This step will start below the maximum thickness of the spacer. If your hub protrusion exceeds the spacer bore depth, the spacers will not sit flush! So please check your vehicle's before purchasing!

Please contact us if you are unsure of this or any information