PLEASE READ ALL DISLCAIMERS BEFORE PURCHASING OUR PRODUCTS!
GUIDANCE FOR SIZING, FITMENT AND INSTALLATION OF AFTERMARKET MOTOR VEHICLE PRODUCTS FROM A PROFESSIONAL IS STRONGLY RECOMMENDED!
Caold Technology custom made wheel spacer adapters:
Per 1 qty order is 1 pair, 2 pcs
- Car PCD - 8x165.1
- Wheel PCD - 6x139.7
- Outer Diameter- 204 mm
- Hub centric lip height - 8 mm
- Stud Thread Length - 30mm (if you require longer please contact us first)
- PCD Counterbore Hole Dimensions: 15mm stepping up to 29mm with a 60° taper
- Stud Hole Diameter: 14mm
If any of these dimensions need to be customised, please contact us first as we will need to determine feasibility and extra cost and time required to produce the spacers
For the following, please let us know in the section 'Special Instruction for Seller' when you checkout
- Car CB - 115.9/116.6/116.7/117/121/121.3/123.9/124.9/Other (please state)
- Wheel CB - 66.1/67.1/77.8/78.1/93.1/100/100.1/100.5/106/106.1/108/110/Other (please state)
- Stud Size - M12x1.5 / M14x1.5 / M14x2.0 / 1/2"-20 UNF / 9/16"-18 UNF
If you require a car centre CB under 93.1mm, please contact us first!
If you require a different stud size than listed, please contact us first!
If you're car uses lug bolts as fasteners, please contact us first as there different considerations to evaluate!
Open ended nuts of will be provided for mounting. The height will depend on the thickness of the the bottom pieces:
- For 15mm, 10mm nuts
- 20 & 25mm, 16mm nuts
- ≥30mm, 20mm nuts
If you car uses lug bolts, you can additionally purchase low profile spacer bolts or a stud conversion kit to use instead of your OEM bolts. Please contact us for more information!
Regarding the thickness: In order to adapt between stud patterns with different number of studs, we stack two spacers together (the hub side on the bottom and the wheel side on top), so 30mm in this case is two 15mm spacers stacked together (30mm is therefore also the minimum thickness we can do). Your hub stud thread length must be considered. If you have any queries or questions about this, please contact us first.
The bottom piece of the spacers with have threaded inserts embedded into them engraved with the thread size and we still supply Grade 12.9 steel black screws of matching thread size as fasteners that fit into specially drilled holes on the top pieces . Please refer to our disclaimers page for torque settings for these screws
If you have special request or different specs you'd like to pursue, please contact us via email, sales@caold.com.au or call our number 03 9560 1660 (weekdays 9.30am to 5pm or text our phone number 0423 499 258.